Distribution by
Mouser
View alternatives
Assembly settings
Front
Front form
Round

Round

choose ...
  • Round
Front bezel colour
Nature

Nature

choose ...
  • Black
  • Grey
  • Nature
Front bezel material
Stainless steel

Stainless steel

choose ...
  • Aluminium
  • Plastic
  • Stainless steel
Front dimension
Ø 29 mm

Ø 29 mm

choose ...
  • Ø 29 mm
Mounting
Design
Raised

Raised

choose ...
  • Raised
Mounting type
Panel mounting

Panel mounting

choose ...
  • Panel mounting
Mounting cut-out
Ø 22 mm

Ø 22 mm

choose ...
  • Ø 22 mm
Operating-/Indication part
Lens type
Level with front bezel

Level with front bezel

choose ...
  • Level with front bezel
  • Raised above front bezel
Lens shape
Flush

Flush

choose ...
  • Flush
Lens colour
Green

Green

choose ...
  • Blue
  • Colourless
  • Green
  • Red
  • Yellow
Lens material
Plastic

Plastic

choose ...
  • Plastic
Lens illumination
Illuminated

Illuminated

choose ...
  • Illuminated
Shape of illumination
Front

Front

choose ...
  • Front
Marking plate optics
translucent

translucent

choose ...
  • translucent
  • transparent
Illumination colour
White

White

choose ...
  • Blue
  • Green
  • Red
  • White
  • Yellow
Marking plate illumination
illuminative

illuminative

choose ...
  • illuminative
  • ring illumination
Electrical characteristics
Contacts configuration
1 NO

1 NO

choose ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NC + 2 NO
  • 2 NO
  • 3 NC + 3 NO
  • 4 NC + 4 NO
Switching rating
42 V @ 0,1 A

42 V @ 0,1 A

choose ...
  • 250 V @ 3 A
  • 42 V @ 0,1 A
Operating voltage kind of
V AC/DC

V AC/DC

choose ...
  • V AC/DC
Operating voltage
24 V

24 V

choose ...
  • 12 V
  • 24 V
  • 28 V
  • 48 V
Mechanical Characteristics
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

choose ...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

choose ...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

choose ...
  • Gold
Switching action
Maintained

Maintained

choose ...
  • Maintained
  • Momentary
Ambient Condition
IP front protection
IP67

IP67

choose ...
  • IP67
Back
View detailed product overview
Push button
Distribution by
Mouser
https://mouser.eao.com/p/fff6b4c2

Illuminated push button, Series 14, Ø 29 mm, illuminative, Raised, 1 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm

  • 704.602.5
  • 704.609.9
  • 14-475.036
  • 704.600.9
  • 10-2112.1069

  • Lens type
  • Lens colour
704.602.5
  • Marking plate illumination
  • Marking plate optics
  • Marking plate colour
704.609.9
  • Switching action
  • Switching rating
  • Switching system
  • Terminal
  • Contacts configuration
14-475.036
  • Front bezel colour
  • Front bezel material
704.600.9
  • Operating voltage
  • Illumination colour
10-2112.1069
Add Accessories & Tools
Add to compare
0 in stock 60.11 USD
Add to Cart
Your product:
704.602.5
704.609.9
14-475.036
704.600.9
10-2112.1069

704.602.5~10-2112.1069~14-475.036~704.600.9~704.609.9

Illuminated push button, Series 14, Ø 29 mm, illuminative, Raised, 1 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm

60.11 USD0 in stock
Product range
HMI function:
Illuminated push button
Series:
Series 14
Front
Front dimension:
Ø 29 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Stainless steel
Mounting
Design:
Raised
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Operating-/Indication part
Lens colour:
Green
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Lens type:
Level with front bezel
Marking plate colour:
White
Marking plate optics:
translucent
Marking plate illumination:
illuminative
Illumination colour:
White
Shape of illumination:
Front
Electrical characteristics
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts configuration:
1 NO
Operating voltage:
24 V AC/DC +10%
Operation current:
2,5 - 5 mA ±15 %
Switching rating:
42 V @ 0,1 A
Lumi. Intensity:
750 mcd
Mechanical Characteristics
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained
Switching system:
Low-level element
Tightening torque:
Fixing nut max. 0.25 Nm
Total weight:
0.032 kg
Ambient Condition
IP front protection:
IP67
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Other
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Share and save this product
Download files
0 in stock 60.11 USD
Add to Cart
Your product consists of the following 5 COMPONENTS:
704.602.5

704.602.5

Lens

1.71 USD232 in stock
Front
Front form:
Round
Operating-/Indication part
Lens colour:
Green
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Lens type:
Level with front bezel
Shape of illumination:
Front
Mechanical Characteristics
Weight:
0.001 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Lens, Ø 23.7 mm, Illuminated, Green, Flush, Plastic
Dimension:
Ø 23.7 mm
Hints:
To obtain IP67, use marking plate Part No. 704.609.9
Download files
Component for 1.71 USD
Add to Cart
704.609.9

704.609.9

Marking plate

0.88 USD590 in stock
Operating-/Indication part
Marking plate colour:
White
Marking plate optics:
translucent
Marking plate illumination:
illuminative
Mechanical Characteristics
Weight:
0 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Marking plate, Ø 20 mm, illuminative, White, Plastic, translucent
Dimension:
Ø 20 mm
Hints:
for lens round flat
Download files
Component for 0.88 USD
Add to Cart
14-475.036

14-475.036

Actuator

23.66 USD0 in stock
Front
Front form:
Round
Mounting
Mounting type:
Panel mounting
Operating-/Indication part
Lens illumination:
Illuminated
Electrical characteristics
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts:
1 NO
Switching rating:
42 V @ 0,1 A
Electric strength:
3000 VAC, 50 Hz, 1 min. between all terminals and earth, according to EN/IEC 61058-1
Protection class:
ll
Mechanical Characteristics
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Mechanical lifetime:
1 Mil. cycles of operation (RCC/RPB)
Operating force:
3 N … 4 N, depending on the number of switching elements
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.25 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Wire cross section:
Max. wire diameter 2 wires of 1 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
Weight:
0.016 kg
Ambient Condition
IP front protection:
IP67, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 150 m / s², pulse width 11 ms, 3-axis, (semi-sinusoidal as per EN IEC 60068-2-27)
Certificate
Conformities:
2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Actuator, Illuminated, Round, 1 NO, Maintained, Universal terminal, 2 x 0.5 mm, IP67, according to DIN EN 60529
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Terminals (rear side)
B = Anti twist device
C = Diode block
D = Drilling plan (component side)
Mounting cut-outs:
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Download files
0 in stock 23.66 USD
Add to Cart
704.600.9

704.600.9

Front bezel

17.61 USD6 in stock
Front
Front dimension:
Ø 29 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Stainless steel
Mounting
Mounting type:
Panel mounting
Mechanical Characteristics
Weight:
0.014 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Front bezel, Ø 29 mm, Nature, Stainless steel
Dimension:
Ø 29 mm
Download files
Component for 17.61 USD
Add to Cart
10-2112.1069

10-2112.1069

Single-LED

16.25 USD56 in stock
Operating-/Indication part
Illumination colour:
White
Electrical characteristics
Operating voltage:
24 V AC/DC +10%
Operation current:
2,5 - 5 mA ±15 %
Lumi. Intensity:
750 mcd
Mechanical Characteristics
Weight:
0.001 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Single-LED, T5.6, White, 24 V AC/DC +10%
Hints:
For LED element fitting information see Application guidelines, LED polarity
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Download files
Component for 16.25 USD
Add to Cart
Cookie consent
Our website uses cookies. For more information about cookies on this website, please see our Privacy Policy and learn more about us in the Legal Notice. You may change the setting in the Privacy Policy.
Accept all
Reject non-required
Manage Settings