Distribuzione attraverso
Mouser
Esplora il catalogo
Assembly settings
Caratteristiche meccaniche
Terminal
PCB terminal

PCB terminal

scegliere ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Deutsch DT04-6P
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • TE 8P-1745000-3
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
  • Würth Elektronik WR-MPC3, 16 Pins
Di più
Titel Accessory
PCB plug-in base

PCB plug-in base

scegliere ...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Protective shroud, 6PB
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Symbol 0000 - blank
  • Symbol 0027 - Cooling; air conditioning
  • Symbol 0083 - Low beam; dipped beam
  • Symbol 0084 - Turn signals
  • Symbol 0085 - Hazard warning
  • Symbol 0086 - Windscreen wiper; windshield wiper
  • Symbol 0087 - Windscreen washer and wiper
  • Symbol 0097 - Rear window wiper
  • Symbol 0238 - Parking brake
  • Symbol 0244 - Horn
  • Symbol 0251 - Functional arrow; group select
  • Symbol 0635A - Windscreen demisting and defrosting
  • Symbol 0636A - Rear window demisting and defrosting
  • Symbol 0637A - Interior heating; heater
  • Symbol 0649A - Heated seat
  • Symbol 0651A - Horizontal return with line spacing
  • Symbol 0717 - Call for maintenance
  • Symbol 1141A - Identification light; beacon
  • Symbol 1204 - Flood light; working light
  • Symbol 1421A - Interior compartment illumination; interior (dome) light
  • Symbol 2025 - Scrolling
  • Symbol 2026 - Help
  • Symbol 2037 - Backspace
  • Symbol 2047 - Cruise control
  • Symbol 2048 - Traction control
  • Symbol 2063 - Battery disconnect; battery shut-off
  • Terminal cover
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Wall mounting kit
Indietro
Mostra una panoramica dettagliata del prodotto
Distribuzione attraverso
Mouser
https://mouser.eao.com/component/19-941/it/pc...

PCB plug-in base

  • 19-941

19-941 PCB plug-in base, 8.9 mm x 8.9 mm x 11.7 mm, PCB terminal, 90° angled
19-941
0 in magazzino Caricamento ...
Aggiungi al carrello
Il vostro prodotto:
19-941

19-941

PCB plug-in base

Caricamento ...
Gamma di prodotti
Product Status:
Phase-out
Caratteristiche elettriche
Forward voltage:
Caratteristiche meccaniche
Terminal:
PCB terminal
Weight:
0.001 kg
Di più
Short Description:
PCB plug-in base, 8.9 mm x 8.9 mm x 11.7 mm, PCB terminal, 90° angled
Titel Accessory:
PCB plug-in base
Dimension:
8.9 mm x 8.9 mm x 11.7 mm
Pins:
90° angled
Dimension drawings:
Dimension drawings
for Part No. 19-940
Scarica i file
0 in magazzino Caricamento ...
Aggiungi al carrello
Informazioni sui Cookie
Il nostro sito web utilizza i cookie. Per ulteriori informazioni sui cookie utilizzati in questo sito web, consultare la nostra Informativa sulla Privacy e per saperne di più su di noi, consultare la Informazioni Corporate. È possibile modificare le impostazioni nella Informativa sulla Privacy.
Accetta tutti i cookie
Nega tutti i cookie
Gestisci impostazioni