Distributie via
Mouser
Mouser
Assembly settings
Montage
Component mounting type
Front mounting
Front mounting
kiezen...
Elektrische kenmerken
Contacts
2 NC
2 NC
kiezen...
Switching rating
500 V AC @ 10 A
500 V AC @ 10 A
kiezen...
Mechanische kenmerken
Terminal
Screw terminal
Screw terminal
kiezen...
Switching system
Slow-make switching element
Slow-make switching element
kiezen...
Contact material
Silver
Silver
kiezen...
Meer
Switching element type
Double
Double
kiezen...
Terug
Uw product:
Montage
- Component mounting type:
- Front mounting
Elektrische kenmerken
- Switching voltage and switching current:
at AC-12
Voltage
24 V
48 V
110 V
230 V
400 V
500 V
Current
10 A
10 A
10 A
8 A
6 A
10 A
at AC-15
Voltage
24 V
48 V
110 V
230 V
400 V
500 V
Current
6 A
6 A
6 A
4 A
3 A
1,4 A
at DC-12
Voltage
24 V
48 V
110 V
230 V
400 V
500 V
Current
10 A
5 A
2,5 A
1 A
0,3 A
0,2 A
at DC-13
Voltage
24 V
48 V
110 V
230 V
400 V
500 V
Current
3 A
1,5 A
0,7 A
0,3 A
0,1 A
0,07 A
- Contacts:
- 2 NC
- Contact reliability:
- One contact failure per 10 million switching operations (5 V, 1 mA)One contact failure per 100 million switching operations (17 V, 5 mA)
- Insulation voltage:
- Rated value 500 V
- Surge voltage resistance:
- Rated value 6 kV
- Switching rating:
- 500 V AC @ 10 A
- Pollution degree:
- 3
- Standards:
- The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1
- Thermal current Ith:
- 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.
Mechanische kenmerken
- Terminal:
- Screw terminal
- Contact material:
- Silver
- Switching system:
- Slow-make switching element
- Switching system:
- The double-break, slow-make switching element is equipped with normally open or normally closed contact. The normally closed contact has forced opening.Up to six switching elements can be snapped to each holder.The NC contact opens automatically upon disconnection of the actuator. On delivery, the contact is open (= safe state).Activation (= NC contacts on the non-actuated commanding device are closed) takes place upon first-time actuation after the contact block is snapped onto the actuator.
- Mechanical lifetime:
- 10 Mil. cycles of operation
- Tightening torque:
- 0.8 … 0.9 Nm
- Operating frequency:
- Max. 3 600/h
- Terminal details 1:
- Solid 2 x (1.0 … 1.5mm²)– With end sleeves 2 x (0.5 … 0.75 mm²)
- Terminal details 2:
- Finely stranded– Without end sleeves 2 x (0.5 … 0.75 mm²)– Without end sleeves 2 x (0.5 … 1.5 mm²)– For AWG cables for auxiliary contacts 2 x (18 … 14)
- Wire cross section:
- Solid 2 x (1.0 … 1.5mm²)– With end sleeves 2 x (0.5 … 0.75 mm²)Finely stranded– Without end sleeves 2 x (0.5 … 0.75 mm²)– With end sleeves 2 x (0.5 … 1.5 mm²)– For AWG cables for auxiliary contacts 2 x (18 … 14)
- Weight:
- 0.018 kg
Omgevingscondities
- IP Protection:
- IP20 Terminal, IP40 Housing
- Operating temperature:
- – 25 °C … + 70 °C
- Storage temperature:
- – 40 °C … + 80 °C
- Shock resistance:
- According to IEC 60068-2-27: Sinusoidal half-wave 50 g / 11 ms
- Vibration resistance:
- According to IEC 60068-2-6: 2 … 500 Hz: 5 g
- Climate resistance:
- During operation according to IEC 60721: 3K6, 3C3, 3S2, 3M6
Certificaten
- Approbations:
- CCC, CSA, UL
- Conformities:
- CE, UKCA
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Meer
- Short Description:
- Switching element, Slow-make switching element, 500 V AC @ 10 A, Silver, 2 NC, Screw terminal, Front mounting
- Product attributes:
- Front plate mounting
- Switching element type:
- Double
- Wiring diagrams:
- Dimension drawings:
A = Screw terminal
for Part No. 45-314.1Z10
Bestanden downloaden
Component voor 23.97 USD
Toevoegen aan winkelwagentje