Distribution par
Mouser
Mouser
Assembly settings
Caractéristiques électriques
Contacts
1 NO
1 NO
choisir ...
Switching rating
250 V AC/DC @ 5 A
250 V AC/DC @ 5 A
choisir ...
Caractéristiques mécaniques
Terminal
Screw terminal
Screw terminal
choisir ...
Switching positions
2 positions
2 positions
choisir ...
Switching system
Slow-make switching element
Slow-make switching element
choisir ...
Contact material
Silver
Silver
choisir ...
Autres
Material
Plastic, according to UL 94 V0
Plastic, according to UL 94 V0
choisir ...
Retour
Votre produit:
Caractéristiques électriques
- Switching voltage and switching current:
Switch rating AC with silver contact
Service category AC-15
according to EN IEC 60947-5-1
Voltage
125 VAC
250 VAC
Current
3 A
2 A
Switch rating DC with silver contact
Service category DC-13
according to EN IEC 60947-5-1
Voltage
250 VDC
Current
0.2 A
- Contacts:
- 1 NO
- Contact resistance:
- New state ≤ 50 mΩ, as per DIN/IEC 60512-2-4, measured at 100 mA, 10 V
- Rated Operational Voltage Ue:
- 250 VAC/DC according to EN IEC 60947-1
- Rated impulse withstand voltage Uimp:
- 4 kV, according to EN/IEC 60947-5-1
- Rated insulation voltage Ui:
- 320 VAC, according to EN / IEC 60947-5-1
- Recommended minimum operational data:
Voltage
20 VAC/DC
Current
100 mA
- Switching rating:
- 250 V AC/DC @ 5 A
- Electrical lifetime:
- ≥50 000 cycles of operation at 250VAC, 2A, cosφ 0.95,
- Electric strength:
- 4000 VAC, 50 Hz, 1 minute, as per DIN / IEC 60512-2 between all terminals and earth
- Overvoltage category:
- III, according to EN / IEC 60947-5-1
- Pollution degree:
- 2, according to EN IEC 60947-1
- Protection class:
- II, according to EN / IEC 61058-1
- Standards:
- The switches comply with the “Standards for low-voltage switching devices” EN IEC 61058-1, EN IEC 60947-5-1
- Thermal current Ith:
- 5 A, according to EN / IEC 60947-5-1
Caractéristiques mécaniques
- Terminal:
- Screw terminal
- Contact material:
- Silver
- Switching system:
- Slow-make switching element
- Switching system:
- Double-break slow-make system, contact opening width 2 x 1.5 mm, with 2 x 2 contact points per switching element.NC-contact elements in the slow-make elements fulfill requirements of switches with forced opening as per EN / IEC 60947-5-12.17.
- Switching positions:
- 2 positions
- Wire cross section:
- 1 wire flexible: 0.5 … 0.75 mm²1 wire super flexible: 0.5 mm²1 wire rigid: 0.5 … 1.5 mm²2 wires super flexible: 0.5 mm²2 wires flexible: 0.5 mm²2 wires rigid: 0.75 mm²
- Weight:
- 0.014 kg
Conditions environnementales
- IP Protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- Max. 100 m / s², pulse width, 3-axis (sinusoidal EN IEC 60068-2-27)
- Vibration resistance:
- Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
- Climate resistance:
- Damp heat, cyclic: 96 hours, + 25 °C/97 %, + 55 °C/93 % relative humidity, as per EN IEC 60068-2-30Damp heat, steady: 56 days, + 40 °C/93 % relative humidity, according to EN IEC 60068-2-78Rapid change of temperature: 100 cycles, – 40 °C … + 80 °C, as per EN / IEC 60068-2-14
Certificats
- Approbations:
- CB (IEC 61058-1), CQC, CSA, DNV, ENEC (EN 61058-1), UL, VDE
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Autres
- Short Description:
- Switching element, Slow-make switching element, 250 V AC/DC @ 5 A, Silver, 1 NO, Screw terminal
- Material:
- Plastic, according to UL 94 V0
- Product attributes:
- Without lamp terminal
- Wiring diagrams:
- Component layouts:
Télécharger des fichiers
Composant pour 17.28 USD
Ajouter au panier