Montaggio
- Mounting type:
- for snapping in place
Unità operativa/display
- Illumination colour:
- White
Caratteristiche elettriche
- Contacts:
- 2 NO
- Operating voltage:
- 23 - 31.6 V DC ±10 %
- Operation current:
- 55 mA
- Switching rating:
- 30 V DC @ 0,1 A
- Communication interface:
- AS-i
Caratteristiche meccaniche
- Terminal:
- Connector M12
- Contact material:
- Gold-plated silver
- Switching system:
- Short-travel element
- Switching system:
Short-travel snap-action switching system with two independent contact points and tactile operation
Guarantees reliable switching even of very light loads. Fitted with 1 normally open contact
- Mechanical lifetime:
- ≥1 Mil. cycles of operation
- Operating force:
- 4.5 N ±1 N (measured at the lens)
- Operating Travel:
- ca. 0.5 mm
- Terminal details 1:
Connection: M12 plug 5-pin, male, A-coding / Pin assignment: Pin1: ASi(+) / Pin3: ASi(-)
Status indicator: Bi-colour LED (green = power on / red = fault / address 0)
Pole reversal protection: Integrated
Condizioni ambientali
- IP Protection:
- IP67
- Operating temperature:
- – 25 °C … + 60 °C
- Storage temperature:
- – 25 °C … + 80 °C
- Shock resistance:
Max. 100 m / s², pulse width, 3-axis (sinusoidal EN IEC 60068-2-27)
- Vibration resistance:
Max. 50 m / s² from 10 Hz ... 500 Hz, 10 cycles, 3-axis (sinusoidal EN IEC 60068-2-6)
Certificati
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Smart-Box, weiss, 2 Tasten konfigurierbar, 30 V DC @ 0,1 A, 23 - 31.6 V DC ±10 %, 2 NO, Connector M12, White
- Dimension:
- 110.9 mm x 45 mm x 45.7 mm
- Material:
- Plastic, according to UL 94 V0
- Hints:
Mount the mounting adaptor on the mounting surface.
Hang the Smart-Box on one side (note the orientation of the mounting adaptor on the housing).
Press the Smart-Box onto the adaptor on the opposite side until the box clicks into place.
Alternatively, the module can be placed on a standard top-hat rail or mounted on a surface using screws from the rear (see dimension drawings).
- Description component:
- Upper part of housing: PBT / UL-V0 / colour similar to RAL9010; Lower part of housing: PBT / UL-V0 / colour similar to RAL9011; Spring element (for restraint): POM (nature); Seal: MVQ silicone foam bright; Blind plug: PC / glass clear; Mounting adaptor: Stainless steel 1.4301 / surface vibratory finish; Housing screws: Stainless steel A2; Marking plate: Black PVC / surface aluminium-coloured, adhesive; M12 connector housing: Die cast zinc
- Colour RAL:
- 9010 RAL
- Wiring diagrams:
- Dimension drawings: