Distribution par
Mouser
Mouser
Assembly settings
Front
Front form
Round
Round
choisir ...
Front bezel colour
Black
Black
choisir ...
Front bezel material
Plastic
Plastic
choisir ...
Front dimension
Ø 25 mm
Ø 25 mm
choisir ...
Montage
Design
Flush
Flush
choisir ...
Mounting type
Panel mounting
Panel mounting
choisir ...
Mounting cut-out
Ø 22 mm
Ø 22 mm
choisir ...
Conditions environnementales
IP front protection
IP65, IP67
IP65, IP67
choisir ...
Retour
Votre produit:
Front
- Front dimension:
- Ø 25 mm
- Front form:
- Round
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Montage
- Design:
- Flush
- Mounting cut-out:
- Ø 22.5 mm
- Mounting type:
- Panel mounting
Caractéristiques mécaniques
- Tightening torque:
- Fixing nut 0.8 Nm
- Weight:
- 0.007 kg
Conditions environnementales
- IP front protection:
- IP65, IP67
- IP Protection:
- IP65, IP67
- Operating temperature:
- – 25 °C … + 70 °C
- Storage temperature:
- – 40 °C … + 85 °C
- Climate resistance:
- Damp heat, cyclic: 96 hours, + 25 °C/97 %, + 55 °C/93 % relative humidity, as per EN IEC 60068-2-30Damp heat, steady: 56 days, + 40 °C/93 % relative humidity, according to EN IEC 60068-2-78Rapid change of temperature: 100 cycles, – 40 °C … + 80 °C, as per EN / IEC 60068-2-14
Certificats
- Approbations:
- EBC (TSI PRM), NFF
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Autres
- Short Description:
- Actuator, Ø 22.5 mm, Ø 25 mm, Round, Black, Plastic, IP65, IP67
- Hints:
- Illuminated lens, non-illuminated bezel
- Description component:
- Material housing actuator: Plastic as per UL94 V0
- Wiring diagrams:
- Mounting cut-outs:
- Dimension drawings:
A = Lens level with bezel
E = Lens raised above bezel
H = Mushroom-head cap
A = Plug-in terminal 2.8 mm x 0.8 mm
B = Flat ribbon cable
D = Lens level with bezel
E = Lens raised above bezel
H = Mushroom-head cap
Télécharger des fichiers
Non disponible