500 VAC, 50 Hz, 1 minute according to DIN IEC 60512-2
기계적 특성
Terminal:
Flat ribbon cable
Contact material:
Gold-plated silver
Switching system:
Short-travel element
Switching system:
Short-travel snap-action switching system with two independent contact points and tactile operation
Guarantees reliable switching even of very light loads. Fitted with 1 normally open contact
Mechanical lifetime:
≥1 Mil. cycles of operation
Operating force:
4.5 N ±1 N (measured at the lens)
Operating Travel:
ca. 0.5 mm
Weight:
0.01 kg
주변 환경
IP Protection:
IP40 rear side, standard version, IP67 rear side, fully sealed version, with mounted actuator only.
Operating temperature:
– 25 °C … + 70 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 100 m / s², pulse width, 3-axis (sinusoidal EN IEC 60068-2-27)
Vibration resistance:
Max. 50 m / s² from 10 Hz ... 500 Hz, 10 cycles, 3-axis (sinusoidal EN IEC 60068-2-6)
증명서
REACH:
REACH compliant
RoHS:
RoHS compliant
기타
Short Description:
Switching element, Short-travel element, 42 V AC/DC @ 0,1 A, Gold-plated silver, 1 NO, Flat ribbon cable
Kind of iIllumination:
Bi-colour-LED
Material:
Plastic
Hints:
LED and built-in resistor included
Cabel connection IP 67, rear side fully sealed. The illumination element of the cable version cannot be disconnected from the actuator any longer
Best illumination level will be reached with aluminium lens with spot, Part No. 84-7215.x00 and 84-7211.x00
Standard version: Cable length 300 mm
Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67)
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Wiring diagrams:
Component layouts:
파일 다운로드
구성 요소 45.69 USD
장바구니에 담기
쿠키 동의
본 웹사이트는 쿠키를 사용합니다. 본 웹사이트의 쿠키에 대한 자세한 내용은 개인정보 처리방침을 참조하시고, 저희에 대한 자세한 내용은 법적 고지에서 확인하실 수 있습니다. 설정은 개인정보 처리방침에서 변경하실 수 있습니다.