≥500 000 cycles of operation at 42VDC, 50mA, according to IEC 60512-5-9c, When attention is paid to the direction of current flow from terminal 3/4 to 1/2 the electrical life can be prolonged.
Electric strength:
500 VAC, 50 Hz, 1 minute according to DIN IEC 60512-2-4a
기계적 특성
Terminal:
PCB terminal
Contact material:
Gold
Switching action:
Momentary
Switching system:
Short-travel element
Switching system:
Short-travel snap-action switching system with two independent contact points and tactile operation
Guarantees reliable switching even of very light loads.
1 normally open contact
Mechanical lifetime:
≥1 Mil. cycles of operation (switching element under overlay), ≥5 Mil. cycles of operation (switching element without overlay)
Operating force:
2.7 N ±1 N (measured on switching element)
Operating Travel:
ca. 0.5 mm
Weight:
0.001 kg
주변 환경
IP Protection:
IP40 switching element (fluxproof to DIN 41640 Part 84), IP65 (front side with overlay foil)
Operating temperature:
– 25 °C … + 70 °C
Storage temperature:
– 40 °C … + 85 °C
증명서
Conformities:
CE, UKCA, 2011 / 65 / EC (RoHS)
REACH:
REACH compliant
RoHS:
RoHS compliant
기타
Short Description:
Switching element, Short-travel element, 42 V @ 0,1 A, Gold, 1 NO, PCB terminal
Material:
Plastic
Hints:
The customer has to decide what series resistor shall be used to the LED
LED and mounting flange to be ordered separately
Wiring diagrams:
Component layouts:
A = Switching element with illumination B = Single LED C = Drilling plan (component side) D = Hole for switching element, pad max. Ø 2.5 mm E = Hole for LED
Dimension drawings:
파일 다운로드
구성 요소 5.15 USD
장바구니에 담기
쿠키 동의
본 웹사이트는 쿠키를 사용합니다. 본 웹사이트의 쿠키에 대한 자세한 내용은 개인정보 처리방침을 참조하시고, 저희에 대한 자세한 내용은 법적 고지에서 확인하실 수 있습니다. 설정은 개인정보 처리방침에서 변경하실 수 있습니다.