This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Release type:
Twist to unlock
Mechanical lifetime:
1 Mil. cycles of operation (RCC/RPB)
Operating force:
18 … 21 N (depending on the switching element)
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.5 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Weight:
0.015 kg
주변 환경
IP front protection:
IP65, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
증명서
REACH:
REACH compliant
RoHS:
RoHS compliant
기타
Short Description:
Actuator, Ø 24,5 mm, Mushroom-head, Non illuminated, Red, Plastic, opaque, Round, 2 NC, Maintained, Universal terminal, 2 x 0.5 mm, IP65, according to DIN EN 60529, Twist to unlock
Housing colour:
Black
Hints:
Marking arrows
Wiring diagrams:
Mounting cut-outs:
Dimension drawings:
A = Solder terminal B = Plug-in terminal 2.8 mm x 0.5 mm C = Universal terminal 2.0 mm x 0.5 mm
파일 다운로드
구성 요소 37.61 USD
장바구니에 담기
쿠키 동의
본 웹사이트는 쿠키를 사용합니다. 본 웹사이트의 쿠키에 대한 자세한 내용은 개인정보 처리방침을 참조하시고, 저희에 대한 자세한 내용은 법적 고지에서 확인하실 수 있습니다. 설정은 개인정보 처리방침에서 변경하실 수 있습니다.