Distribution par
Mouser
Montrer les alternatives
Assembly settings
Front
Front form
Round

Round

choisir ...
  • Round
Front bezel colour
Nature

Nature

choisir ...
  • Black
  • Nature
Front bezel material
Aluminium

Aluminium

choisir ...
  • Aluminium
  • Plastic, according to UL 94 V0
Front dimension
Ø 25 mm

Ø 25 mm

choisir ...
  • Ø 25 mm
Montage
Design
Flush

Flush

choisir ...
  • Flush
Mounting type
Panel mounting

Panel mounting

choisir ...
  • Panel mounting
Mounting cut-out
Ø 22 mm

Ø 22 mm

choisir ...
  • Ø 22 mm
Partie commande/affichage
Lens shape
Flush

Flush

choisir ...
  • Flush
Lens colour
Colourless

Colourless

choisir ...
  • Black
  • Blue
  • Colourless
  • Green
  • Nature
  • Orange
  • Red
  • Smokey black
  • Yellow
Lens material
Plastic, according to UL 94 HB

Plastic, according to UL 94 HB

choisir ...
  • Aluminium
  • Plastic
  • Plastic, according to UL 94 HB
Lens illumination
Illuminated

Illuminated

choisir ...
  • Illuminated
Shape of illumination
Front

Front

choisir ...
  • Dot
  • Front
  • Ring
  • Symbol
Illumination colour
Red

Red

choisir ...
  • Blue
  • Green
  • Red
  • Red / Green
  • White
  • Yellow
Caractéristiques électriques
Contacts Configuration
2 NO

2 NO

choisir ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NC + 2 NO
  • 2 NO
  • 3 NC + 3 NO
  • 4 NC + 4 NO
Switching rating
42 V @ 0,1 A

42 V @ 0,1 A

choisir ...
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 42 V @ 0,1 A
Operating voltage kind of
V AC/DC

V AC/DC

choisir ...
  • V AC/DC
  • V DC
Operating voltage
12 V

12 V

choisir ...
  • 12 V
  • 24 V
  • 28 V
Caractéristiques mécaniques
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

choisir ...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

choisir ...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

choisir ...
  • Gold
Switching action
Momentary

Momentary

choisir ...
  • Maintained
  • Momentary
Conditions environnementales
IP front protection
IP65

IP65

choisir ...
  • IP65
Retour
Afficher l'aperçu détaillé des produits
Bouton poussoir
Distribution par
Mouser
https://mouser.eao.com/p/f524f4f3

Illuminated push button, Series 51, Ø 25 mm, illuminative, Flush, 2 NO, Gold, IP65, Universal terminal, 2 x 0.5 mm

  • 61-9642.7
  • 51-451.036F
  • 61-9933.0
  • 10-2J09.1062

  • Lens colour
  • Lens material
  • Shape of illumination
61-9642.7
  • Switching system
  • Terminal
  • Switching action
  • Switching rating
  • Contacts Configuration
51-451.036F
  • Front bezel colour
  • Front bezel material
61-9933.0
  • Operating voltage kind of
  • Illumination colour
  • Operating voltage
10-2J09.1062
Ajoute des accessoires & outilage
Ajouter à la comparaison
Non disponible
Votre produit:
61-9642.7
51-451.036F
61-9933.0
10-2J09.1062

61-9642.7~10-2J09.1062~51-451.036F~61-9933.0

Illuminated push button, Series 51, Ø 25 mm, illuminative, Flush, 2 NO, Gold, IP65, Universal terminal, 2 x 0.5 mm

0 en stock
Gamme de produits
HMI function:
Illuminated push button
Séries:
Series 51
Front
Front dimension:
Ø 25 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lens colour:
Colourless
Lens material:
Plastic, according to UL 94 HB
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Illumination colour:
Red
Shape of illumination:
Front
Caractéristiques électriques
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts Configuration:
2 NO
Operating voltage:
12 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Switching rating:
42 V @ 0,1 A
Lumi. Intensity:
330 mcd
Caractéristiques mécaniques
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Tightening torque:
Fixing nut max. 0.5 Nm
Poids total:
0.014 kg
Conditions environnementales
IP front protection:
IP65
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Autres
Housing colour:
Black
Product attributes:
For indicator, push button, illuminated push button
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Enregistrer ou recommander un produit
Télécharger des fichiers
Non disponible
Votre produit se compose des éléments suivants 4 COMPONENTS:
61-9642.7

61-9642.7

Lens

0 en stock
Front
Front form:
Round
Partie commande/affichage
Lens colour:
Colourless
Lens material:
Plastic, according to UL 94 HB
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Shape of illumination:
Front
Caractéristiques mécaniques
Weight:
0.001 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Lens, Ø 19.7 mm, Illuminated, Colourless, Flush, Plastic, according to UL 94 HB
Dimension:
Ø 19.7 mm
Télécharger des fichiers
Non disponible
51-451.036F

51-451.036F

Actuator

39.52 USD0 en stock
Montage
Design:
Flush
Mounting type:
Panel mounting
Partie commande/affichage
Lens illumination:
Illuminated
Caractéristiques électriques
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts:
2 NO
Switching rating:
42 V @ 0,1 A
Electric strength:
2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
Caractéristiques mécaniques
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Mechanical lifetime:
5 Mil. cycles of operation
Operating force:
1,8 … 3,5 N
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.5 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Weight:
0.007 kg
Conditions environnementales
IP front protection:
IP65, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Actuator, Illuminated, 2 NO, Momentary, Universal terminal, 2 x 0.5 mm, IP65, according to DIN EN 60529
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Universal terminal (rear side)
B = Plug-in terminal (rear side)
C = Anti twist device
D = Drilling plan
Mounting cut-outs:
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Télécharger des fichiers
0 en stock 39.52 USD
Ajouter au panier
61-9933.0

61-9933.0

Front bezel set

12.65 USD219 en stock
Front
Front dimension:
Ø 25 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Aluminium
Montage
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Caractéristiques mécaniques
Weight:
0.005 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Front bezel set, Ø 25 mm, Ø 19,7 mm, Nature, Aluminium
Dimension:
Ø 25 mm
Internal size:
Ø 19,7 mm
Product attributes:
For indicator, push button, illuminated push button
Hints:
The colour of anodised aluminium parts can vary due to technical production reasons
Mounting cut-outs:
Mounting cut-outs
Télécharger des fichiers
Composant pour 12.65 USD
Ajouter au panier
10-2J09.1062

10-2J09.1062

Single-LED

13.82 USD0 en stock
Partie commande/affichage
Illumination colour:
Red
Caractéristiques électriques
Operating voltage:
12 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Lumi. Intensity:
330 mcd
Caractéristiques mécaniques
Weight:
0.003 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Single-LED, T1 ¾ MG, Red, 12 V AC/DC +10%
Kind of iIllumination:
Single-LED
Hints:
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
Keep to the country specific safety instructions
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Télécharger des fichiers
0 en stock 13.82 USD
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres