Distribution par
Mouser
Montrer les alternatives
Assembly settings
Front
Front form
Round

Round

choisir ...
  • Round
  • Square
Front bezel colour
Black

Black

choisir ...
  • Black
  • Nature
  • Silver
Front bezel material
Aluminium

Aluminium

choisir ...
  • Aluminium
  • Plastic
Front dimension
Ø 35 mm

Ø 35 mm

choisir ...
  • 35 mm x 35 mm
  • Ø 35 mm
Montage
Design
Flush

Flush

choisir ...
  • Flush
Mounting type
Panel mounting

Panel mounting

choisir ...
  • Panel mounting
Mounting cut-out
Ø 30 mm

Ø 30 mm

choisir ...
  • Ø 30 mm
Partie commande/affichage
Lever shape
short

short

choisir ...
  • long
  • short
Lever colour
Black

Black

choisir ...
  • Black
Lever bar colour
translucent

translucent

choisir ...
  • translucent
Illumination colour
Blue

Blue

choisir ...
  • Blue
  • Green
  • Red
  • Red / Green
  • Red / Yellow
  • White
  • Yellow
Caractéristiques électriques
Contacts Configuration
1 NC + 1 NO

1 NC + 1 NO

choisir ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NO
Switching rating
500 V AC @ 10 A

500 V AC @ 10 A

choisir ...
  • 250 V AC @ 6 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
Operating voltage kind of
V DC

V DC

choisir ...
  • V AC
  • V AC/DC
  • V DC
Operating voltage
130 V

130 V

choisir ...
  • 110 V
  • 12 V
  • 130 V
  • 230 V
  • 24 - 30 V
  • 24 V
  • 28 V
  • 48 V
  • 72 V
Caractéristiques mécaniques
Terminal
Screw terminal

Screw terminal

choisir ...
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
Switching positions
2 positions

2 positions

choisir ...
  • 2 positions
Switching system
Slow-make switching element

Slow-make switching element

choisir ...
  • Slow-make switching element
  • Snap-action switching element
Contact material
Silver

Silver

choisir ...
  • Gold
  • Palladium
  • Silver
Switching action
Rest - Maintained

Rest - Maintained

choisir ...
  • Rest - Maintained
  • Rest - Momentary
Switching angle
90° right

90° right

choisir ...
  • 42° right
  • 90° right
Conditions environnementales
IP front protection
IP65

IP65

choisir ...
  • IP65
Retour
Afficher l'aperçu détaillé des produits
Commutateur sélecteur
Distribution par
Mouser
https://mouser.eao.com/p/fffa6631

Selector switch, Series 04, 2 positions, Flush, 1 NC + 1 NO, Screw terminal

  • 704.411.010I
  • 704.950.0
  • 10-2524.3046
  • 704.910.5-1

  • Front bezel colour
  • Front dimension
  • Front bezel material
  • Lever shape
  • Switching action
  • Front form
  • Switching angle
704.411.010I
  • Terminal
704.950.0
  • Operating voltage kind of
  • Illumination colour
  • Operating voltage
10-2524.3046
  • Contact material
  • Switching system
  • Switching rating
  • Contacts Configuration
704.910.5-1
Ajoute des accessoires & outilage
Ajouter à la comparaison
0 en stock 102.89 USD
Ajouter au panier
Votre produit:
704.411.010I
704.950.0
10-2524.3046
704.910.5-1

704.411.010I~10-2524.3046~704.910.5-1~704.950.0

Selector switch, Series 04, 2 positions, Flush, 1 NC + 1 NO, Screw terminal

102.89 USD0 en stock
Gamme de produits
HMI function:
Selector switch
Séries:
Series 04
Front
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lever colour:
Black
Lever bar colour:
translucent
Lever shape:
short
Illumination colour:
Blue
Caractéristiques électriques
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts Configuration:
1 NC + 1 NO
Operating voltage:
130 V DC +10%
Operation current:
3 mA ±15 %
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Lumi. Intensity:
200 mcd
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Caractéristiques mécaniques
Terminal:
Screw terminal
Contact material:
Silver
Switching action:
Rest - Maintained
Switching system:
Slow-make switching element
Switching positions:
2 positions
Switching angle:
90° right
Tightening torque:
Screw terminal 0.5 Nm
Poids total:
0.097 kg
Conditions environnementales
IP front protection:
IP65
Operating temperature:
– 40 °C … + 55 °C
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Autres
Housing material:
Plastic
max. number of switching elements:
3
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Wiring diagrams
Wiring diagrams
Enregistrer ou recommander un produit
Télécharger des fichiers
0 en stock 102.89 USD
Ajouter au panier
Votre produit se compose des éléments suivants 4 COMPONENTS:
704.411.010I

704.411.010I

Actuator

52.52 USD0 en stock
Front
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lever colour:
Black
Lever bar colour:
translucent
Lever material:
plastic
Lever shape:
short
Caractéristiques électriques
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1
Caractéristiques mécaniques
Switching action:
Rest - Maintained
Switching positions:
2 positions
Switching angle:
90° right
Mechanical lifetime:
≤2.5 Mil. cycles of operation
Weight:
0.051 kg
Conditions environnementales
IP Protection:
IP65 front side
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Actuator, Ø 30.5 mm, Ø 35 mm, optional illuminative, Black, short, Round, Black, Aluminium, anodised, Rest - Maintained
Hints:
Max. 3 switching elements can be clipped on
max. number of switching elements:
3
Switching positions:
Switching positions
Wiring diagrams:
Wiring diagrams
Mounting cut-outs:
Mounting cut-outs
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Dimension drawings:
Dimension drawings
X = Screw terminal
Télécharger des fichiers
0 en stock 52.52 USD
Ajouter au panier
704.950.0

704.950.0

Lamp block

13.00 USD230 en stock
Caractéristiques électriques
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1/DIN EN 60947-5-1
Caractéristiques mécaniques
Terminal:
Screw terminal
Switching positions:
2 positions
Tightening torque:
Screw terminal 0.5 Nm
Wire cross section:
Max. wire cross-section 2 mm x 2.5 mm²
Skinning wire 10 mm
Max. wire cross-section of stranded cable 2 x 1.5 mm²
use stranded wires only with wire end ferrules of 10 mm length
Only one polarity is allowed on each side when wiring.
Weight:
0.016 kg
Conditions environnementales
IP Protection:
IP00
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 300 m/s², pulse width 11 ms (sinusoidal EN IEC 60068-2-27)
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Climate resistance:
Relative humidity, max. 95%, non-condensing
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Lamp block, Plastic, Screw terminal
Housing material:
Plastic
Hints:
When using the lamp block, the application guidelines must be observed.
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Télécharger des fichiers
Composant pour 13.00 USD
Ajouter au panier
10-2524.3046

10-2524.3046

Single-LED

18.67 USD0 en stock
Partie commande/affichage
Illumination colour:
Blue
Caractéristiques électriques
Operating voltage:
130 V DC +10%
Operation current:
3 mA ±15 %
Lumi. Intensity:
200 mcd
Caractéristiques mécaniques
Weight:
0.002 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Single-LED, BA9s, Blue, 130 V DC +10%
Kind of iIllumination:
Single-LED
Hints:
The specified 6 V DC, 24 V DC Bi-colour; 130 V AC, 130 V DC and 230 V AC versions are built with a protection diode
The specified 12, 24, 28, 48 VAC/DC versions are built with a bridge rectifier
The specified 130 VAC types are developed to run on a supply voltage of 130 VAC only
An operation at a higher supply voltage using commercial lampholders with integrated resistors, is not approved
If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = (standard)
B = (super bright)
Télécharger des fichiers
0 en stock 18.67 USD
Ajouter au panier
704.910.5-1

704.910.5-1

Switching element - New Version

18.70 USD25 en stock
Caractéristiques électriques
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts:
1 NC / 1 NO
Rated impulse withstand voltage Uimp:
4 kV
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

110 VDC

Current

5 mA

2 mA

Hard silver contacts

Voltage

24 VDC

110 VDC

Current

50 mA

10 mA
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN IEC UL 60947-5-1
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Caractéristiques mécaniques
Terminal:
Screw terminal
Contact material:
Silver
Switching system:
Slow-make switching element
Switching system:
The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Tightening torque:
Screw terminal 0.8 Nm
Wire cross section:
Wire cross-section 0.75 ... 2.5 mm² / AWG 18 to AWG 14
Skinning wire 10 mm
Max. number of wires: 2
Wire cross-section of stranded cable 0.5 ... 1.5 mm² / AWG 24 to AWG 18
use stranded wires only with wire end ferrules of 10 mm length
Max. number of stranded cables: 2
Only one polarity is allowed on each side when wiring.
Weight:
0.028 kg
Conditions environnementales
IP Protection:
IP20
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
(single impacts, semi-sinusoidal) 300 m/s², pulse width 18 ms, as per DIN EN 60068-2-27
Vibration resistance:
(sinusförmig) 100 m/s² bei 10 Hz…500 Hz, nach DIN EN 60068-2-6, Erhöhtes Breitbandrauschen nach DIN EN 61373, Klasse 1B
Climate resistance:
Relative humidity 10 %rh ... 95 %rh (non-condensing) original packaging according to DIN EN IEC 60721-3-1 Class 1C1
Certificats
Approbations:
CB (IEC 60947-5-1), cULus, DNV, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Switching element - New Version, Slow-make switching element, 500 V AC @ 10 A, Silver, 1 NC / 1 NO, Screw terminal
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
A suitable enclosure is required for applications with increased protection requirements. In North America, the product must be installed in an enclosure in accordance with UL 50E Type 2 or higher.
Special requirements:

Special requirements for positive-opening auxiliary current switches

Positive opening travel

Emergency stop 12.5 mm

Minimum force

Emergency stop 50 N (actuating force at

which is safely switched)

Max. travel

Emergency stop 12.5 mm
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Télécharger des fichiers
Composant pour 18.70 USD
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres