배포에 의한
Mouser
Mouser
Assembly settings
정면
Front form
Round
Round
선택하다 ...
Front bezel type
With transparent silicone membrane
With transparent silicone membrane
선택하다 ...
Front bezel colour
Black
Black
선택하다 ...
Front bezel material
Aluminium
Aluminium
선택하다 ...
Front dimension
Ø 35 mm
Ø 35 mm
선택하다 ...
장착
Design
Flush
Flush
선택하다 ...
Mounting type
Panel mounting
Panel mounting
선택하다 ...
Mounting cut-out
Ø 30 mm
Ø 30 mm
선택하다 ...
작동/표시 부분
Lens type
Level with front bezel
Level with front bezel
선택하다 ...
Lens shape
Flush
Flush
선택하다 ...
Lens colour
Colourless
Colourless
선택하다 ...
Lens material
Plastic
Plastic
선택하다 ...
Lens illumination
Illuminated
Illuminated
선택하다 ...
Shape of illumination
Front
Front
선택하다 ...
Marking plate optics
translucent
translucent
선택하다 ...
Illumination colour
Red
Red
선택하다 ...
Marking plate illumination
illuminative
illuminative
선택하다 ...
전기적 특성
연락처 설정
2 NO
2 NO
선택하다 ...
Switching rating
42 V @ 0,1 A
42 V @ 0,1 A
선택하다 ...
Operating voltage kind of
V AC/DC
V AC/DC
선택하다 ...
Operating voltage
24 V
24 V
선택하다 ...
기계적 특성
Terminal
Universal terminal, 2 x 0.5 mm
Universal terminal, 2 x 0.5 mm
선택하다 ...
Switching system
Low-level element
Low-level element
선택하다 ...
Contact material
Gold
Gold
선택하다 ...
Switching action
Momentary
Momentary
선택하다 ...
주변 환경
IP front protection
IP67
IP67
선택하다 ...
뒤로
배포에 의한
Mouser
Mouser
Illuminated push button, Series 14, Ø 35 mm, illuminative, Flush, 2 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm
- 704.602.7
- 704.609.9
- 14-431.036
- 14-955.4
- 10-2112.1062
- Shape of illumination
- Lens material
- Lens colour
- Marking plate illumination
- Marking plate optics
- Marking plate colour
- Switching action
- Terminal
- Switching rating
- Switching system
- 연락처 설정
- Front bezel material
- Front bezel colour
- Front bezel type
- Operating voltage
- Illumination colour
액세서리 및 도구 추가
귀사의 제품:
제품 라인업
- HMI function:
- Illuminated push button
- 시리즈:
- Series 14
정면
- Front dimension:
- Ø 35 mm
- Front form:
- Round
- Front bezel colour:
- Black
- Front bezel material:
- Aluminium
- Front bezel type:
- With transparent silicone membrane
장착
- Design:
- Flush
- Mounting cut-out:
- Ø 30.5 mm
- Mounting type:
- Panel mounting
작동/표시 부분
- Lens colour:
- Colourless
- Lens material:
- Plastic
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
- Lens type:
- Level with front bezel
- Marking plate colour:
- White
- Marking plate optics:
- translucent
- Marking plate illumination:
- illuminative
- Illumination colour:
- Red
- Shape of illumination:
- Front
전기적 특성
- Switching voltage and switching current:
- 100 mA at 42 VAC/VDC
- 연락처 설정:
- 2 NO
- Operating voltage:
- 24 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Switching rating:
- 42 V @ 0,1 A
- Lumi. Intensity:
- 330 mcd
기계적 특성
- Terminal:
- Universal terminal, 2 x 0.5 mm
- Contact material:
- Gold
- Switching action:
- Momentary
- Switching system:
- Low-level element
- Tightening torque:
- Fixing nut max. 0.25 Nm
- 총 중량:
- 0.033 kg
주변 환경
- IP front protection:
- IP67
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
기타
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- With transparent silicone membrane
- Wiring diagrams:
이 제품을 공유하고 저장하세요
파일 다운로드
0 재고 있음 79.79 USD
장바구니에 담기
귀사의 제품은 다음과 같이 구성됩니다 5 COMPONENTS:
정면
- Front form:
- Round
작동/표시 부분
- Lens colour:
- Colourless
- Lens material:
- Plastic
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
- Lens type:
- Level with front bezel
- Shape of illumination:
- Front
기계적 특성
- Weight:
- 0.001 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Lens, Ø 23.7 mm, Illuminated, Colourless, Flush, Plastic
- Dimension:
- Ø 23.7 mm
- Hints:
- To obtain IP67, use marking plate Part No. 704.609.9
파일 다운로드
구성 요소 1.71 USD
장바구니에 담기
작동/표시 부분
- Marking plate colour:
- White
- Marking plate optics:
- translucent
- Marking plate illumination:
- illuminative
기계적 특성
- Weight:
- 0 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Marking plate, Ø 20 mm, illuminative, White, Plastic, translucent
- Dimension:
- Ø 20 mm
- Hints:
- for lens round flat
파일 다운로드
구성 요소 0.88 USD
장바구니에 담기
정면
- Front form:
- Round
장착
- Mounting type:
- Panel mounting
작동/표시 부분
- Lens illumination:
- Illuminated
전기적 특성
- Switching voltage and switching current:
- 100 mA at 42 VAC/VDC
- Contacts:
- 2 NO
- Switching rating:
- 42 V @ 0,1 A
- Electric strength:
- 3000 VAC, 50 Hz, 1 min. between all terminals and earth, according to EN/IEC 61058-1
- Protection class:
- ll
기계적 특성
- Terminal:
- Universal terminal, 2 x 0.5 mm
- Contact material:
- Gold
- Switching action:
- Momentary
- Switching system:
- Low-level element
- Switching system:
- This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.Special features are the long life, extremely short rebound time and stable contact resistance.
- Mechanical lifetime:
- 5 Mil. cycles of operation
- Operating force:
- 3 N … 4 N, depending on the number of switching elements
- Operating Travel:
- 3 mm
- Tightening torque:
- Fixing nut max. 0.25 Nm
- Terminal details 1:
- The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
- Wire cross section:
- Max. wire diameter 2 wires of 1 mmMax. wire cross-section of stranded cable 2 x 0.75 mm²
- Weight:
- 0.016 kg
주변 환경
- IP front protection:
- IP67, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- Max. 150 m / s², pulse width 11 ms, 3-axis, (semi-sinusoidal as per EN IEC 60068-2-27)
증명서
- Conformities:
- 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Actuator, Illuminated, Round, 2 NO, Momentary, Universal terminal, 2 x 0.5 mm, IP67, according to DIN EN 60529
- Housing colour:
- Black
- Wiring diagrams:
- Component layouts:
A = Terminals (rear side)
B = Anti twist device
C = Diode block
D = Drilling plan (component side)- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Universal-Solder terminal
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
파일 다운로드
구성 요소 33.42 USD
장바구니에 담기
정면
- Front dimension:
- Ø 35 mm
- Front form:
- Round
- Front bezel colour:
- Black
- Front bezel material:
- Aluminium
- Front bezel type:
- With transparent silicone membrane
장착
- Mounting cut-out:
- Ø 30.5 mm
- Mounting type:
- Panel mounting
기계적 특성
- Weight:
- 0.015 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Front bezel, Ø 35 mm, Black, Aluminium
- Dimension:
- Ø 35 mm
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- With transparent silicone membrane
- Hints:
- Front bezel to be mounted with a torque of 0.4 Nm onto actuatorBefore assembling remove the flat gasket of the switchThe colour of anodised aluminium parts can vary due to technical production reasons
- Mounting cut-outs:
파일 다운로드
0 재고 있음 29.96 USD
장바구니에 담기
작동/표시 부분
- Illumination colour:
- Red
전기적 특성
- Operating voltage:
- 24 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Lumi. Intensity:
- 330 mcd
기계적 특성
- Weight:
- 0.001 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Single-LED, T5.6, Red, 24 V AC/DC +10%
- Hints:
- For LED element fitting information see Application guidelines, LED polarityDue to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)When using AC/DC types with AC operation, slight flickering can occurThe luminous intensity stated is for when used with DCElectrical and optical data are measured at 25 °CThe specified versions are built with a protection diode (halve wave rectifier) in series and the LEDLuminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LEDWhere supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
- Wiring diagrams:
- Dimension drawings:
파일 다운로드
구성 요소 13.82 USD
장바구니에 담기